Michael

Forum Replies Created

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • in reply to: UM7 Python Library #1120
    Michael
    Michael
    Keymaster

    Hi Daniel,

    We are currently looking at developing a cross platform interface for the UM7.
    Basically the functionality of the current CHR serial interface software, which runs as Python web/gui application. If all goes to plan, will release in a few months from now!

    I would be interested in looking at your work.
    Thanks for sharing, keep it up.

    Regards,
    Michael
    Redshift Labs

  • in reply to: UM7 register 137 #1078
    Michael
    Michael
    Keymaster

    Hi All,

    You could also downgrade your firmware version to U71C in the interim.
    U71C.hex

    Regards,
    Michael

  • in reply to: U71D firmware two problems #1077
    Michael
    Michael
    Keymaster

    Hello everyone,

    please see the following link
    register 137

    we are working on updating the datasheet/software which will address all these issues as fast as possible

    Thank you for your support and patience.

    Regards,
    Michael

  • in reply to: UM7 register 137 #1075
    Michael
    Michael
    Keymaster

    Hi Ata & Foster,

    UPDATE: 19.08.2016
    PLEASE DOWNLOAD SERIAL INTERFACE SOFTWARE V3.1.3

    Thank you for your support and patience

    Regards,
    Michael

    • This reply was modified 1 year, 11 months ago by Michael Michael. Reason: open in new window
    • This reply was modified 1 year, 8 months ago by Michael Michael. Reason: Updated fix
  • in reply to: UM7 register 137 #1071
    Michael
    Michael
    Keymaster

    Hi Ata & Foster,

    Can I just confirm what version UM7 you are using and the firmware revision number?
    Regarding this issue we are working on a fix for the CHRobotics serial software interface, as the current version does not have the ability to turn on or off the data, we do apologize about this and appreciate your patience. I will post back asap

    Regards,
    Michael

  • in reply to: UM7 keep sending binary although it's turned off #1042
    Michael
    Michael
    Keymaster

    Hi TommiP,

    Please see the following post
    UM7 register 137

    I believe this may be the issue, try turning off the gyro bias estimates.
    Please let me know how you go.

    Regards,
    Michael

  • in reply to: UM7 register 137 #1041
    Michael
    Michael
    Keymaster

    Hello Foster and Ata,

    I do apologize for the lengthy response, we have taken over manufacturing of the UM7 product line so we do thank you for your patience.

    The Register addresses 137, 138, and 139 now contain the gyro bias estimates from the filter. The lower-order byte in register 6 specifies its automatic transmit frequency.

    We are working hard to get an updated datasheet out which contains the new register data.

    Regards,
    Michael

Viewing 7 posts - 16 through 22 (of 22 total)